MyClean Coffee Maker, Titanium Moka Pot

The Moka pot is a unique design for coffee brewing. By heating the water sealed in the bottom chamber, the water reaches a higher temperature and pressure than in normal conditions. When the water boils, the steam accumulated in the bottom will force the water through the funnel, the coffee bed, and the pipe in the upper chamber.

You can drink from the coffee maker directly once the coffee maker cools down.

The height of the coffee maker is 5.12 inches (130mm), and the width of the coffee maker at the bottom is 3.15 inches (80mm).

It is up to your preference. I like to put roughly 10g of ground coffee to get a rich flavorful taste. It's important to note that the coffee powder should not be packed too tightly, otherwise it will cause excessive resistance at the funnel, preventing the coffee from brewing.

Yes

The gasket and two mesh filters are not titanium. We picked food-grade silicone for the gasket and food-grade 304 stainless steel for filters.

• One reason could be that the ground coffee used is too fine or densely packed, causing high resistance at the funnel. It's recommended to use coarse ground coffee in such cases.

• Another reason might be that the heat produced by the heat source is insufficient to generate enough pressure at the bottom. It's recommended to use a stove with greater power.

The residual water left in the bottom chamber after brewing serves as a safety measure to prevent the fire source from overheating the coffee maker. This water acts as a barrier, absorbing excess heat and regulating the temperature inside the device. It ensures the safe operation of the coffee maker and reduces the risk of hazards.